Please click this link to be redirected to our brand new Website!

Loctite Dri-Seal^® Products

Product Description

Loctite Dri-Seal 5061® is a Pre-Applied , non curing, non-toxic aqueous based thread sealant with good high temperature and solvent resistance. This product has potable water approval (KTW & DVGW, Germany) and may be used in hot and cold water couplings and fittings. The coating is dry to the touch and ready for immediate use giving an instant seal.

How does it work?

This thread coating system seals the fitting upon assembly by occupying all available space to give a permanent high pressure seal against most common liquids and gases.

Pre-Applied Technologies Ltd can offer Loctite Dri-Seal® products including 506, 5061.

Technical Data

Technical Data are available in PDF format for the following products:

Material Safety Data Sheets (MSDS) are available from the Loctite Technical Service department

Dri-Seal^® 5061

Loctite Dri-Seal® 5061 is a dry-to-touch non curing thread coating with instant high pressure sealing capabilities. It is normally used on taper or parallel threaded fasteners, fittings, plugs and pipe joints. This product has excellent torque tension (lubricating) characteristics to aid assembly and can be applied either to the male or female components. Loctite Dri-Seal® will not lock the threaded components, therefore disassembly is easy. Dri-Seal® 5061 is approved for Potable Water and Gas.

Key Properties

Water based/environmentally friendly product
High Pressure Instant Seal
Seals against most common fluids and gases
Meets OEM and Automotive Specifications
Seals in any position
Excellent Lubricating properties
No seizing during assembly
Long storage life

Typical Properties

	Dri-Seal® 5061
Colour	Light Blue
Instant Seal	Yes
Sealing Capacity	150 bar
Lubricity	Excellent
Max. Temperature	150°C
Storage Life	up to 4 years